How To Troubleshoot Your Turbo Timer

Comments (0)

We use turbo charger to enhance the performance of our car. We usually have strong expectation that our turbo timer will work at its best. But things can go wrong. A charger may not work well that you bought recently. This would be very disappointing for everyone. However, if you have some minimum ideas on troubleshooting them, you can easily overcome your worry.

Turbo timer is a vital component of every turbocharged engine. After driving, your car engine with a turbocharger should idle for a while to allow your charger to cool down appropriately. Immediate shutting of your engine can ruin or cause serious damages to the charger. Your turbo charger keeps the car engine running for a while after turning off the key. This allows heat sensitive parts and bearings in the charger to cool before spinning stops.

If your turbo fails to work after installation or develops malfunctions, then it is advisable that you undertake troubleshooting. Disconnect your car battery prior to making any essential wiring modifications to the device in order to avoid electrical shock. In order to carry out troubleshooting, start your car to facilitate the operation of the timer. Troubleshooting largely depends on the device malfunctions that you are experiencing.

Observe the timer functions that have failed to operate. It is time to get rid off steering column cover. Remove the inner panels of the car that forbid access to the device wiring system. Check the major wiring harness plug of your supercharger in case it fails to switch on. Wiring harness supplies the turbo timer with power source and splices it into stock ignition. Ensure that you secure some loose connections and replace any damaged harness plugs.

Check if your charger timer lacks car performance monitoring functionality, speed or RPM display. Stock RPM signal is responsible for calculating the supercharger functions. You should make sure that the splicing of turbo charger RPM wire into your stock RPM signal wire is very secure. In order to evade electrical shorting instances, ensure that you cover exposed wires using electrical tape.

Finally, replace your gadget if the wire connections are safe and continue experiencing functionality issues. Electrical surge is the most probable cause for the damage of your internal timer. Make sure the ground wire connects to a proper grounding source. Car chassis screw is secure. This helps in safeguarding your turbo timer from any electrical damages in future.

Make sure to get the best quality turbo timer to avoid troubleshooting them, later!

Article Source:http://EzineArticles.com/?expert